2010年7月27日 - 辛辛那提，俄亥俄州- ROTEX全球有限责任公司,作为全球筛选技术的领导者，提供了旋回往复安检全线(full line of Gyratory Reciprocating Screeners)™设计的准确高生产率干法筛分机。 ROTEX ®旋回往复(full line of Gyratory Reciprocating Screeners)筛网清洗系统，提供高度准确的分离和更高的生产率和较高的产品产量。回旋往复振动筛被安装在世界各地数以千计的地点，在多个行业广泛应用。

         与许多竞争性振动筛相比，ROTEX ®旋回往复(full line of Gyratory Reciprocating Screeners)振动筛拥有两个独立的，独特的筛选检查系统，以最大限度地提高效率。在对近筛网表面回旋往复运动筛选材料的最大尺寸不足的情况，尽量减少了通过筛网筛选物质损失的大小。该系统还能连续的对筛网进行清洁，防止筛网堵塞物料，最大限度地延长正常运行时间。

         ROTEX ®旋转往复式振动筛提供比传统的往复式筛分机更高的产量。没有垂直分量系统，从而保持与筛网保持联系的物质。在料底回旋运动迅速stratifies在整个筛选表面的材料，最大限度地提高筛网利用率。筛网上的清洁球不断冲击筛网表面，防止筛网堵孔，进一步协助物料分级。因此，符合筛网孔劲的物料能够快速通过筛网分级。近线性往复运动在放电结束去除这些粒子的大小最接近的筛网网孔，同时对筛选物料进行准确分级，确保良好的产品和较高筛分比例，更准确地把产品进行分离。

         许多相互竞争的安检人员使用一个检查行动，以履行致盲和颗粒分离功能，可以牺牲一个或两个函数的有效性。由ROTEX ®旋回往复安检人员利用组合提供高效率的行动分离的极端尖锐，生产一致的规格的产品在不牺牲产量。该材料是暴露在全网状开口由于屏幕的甲板上略有倾斜，确保了一致的锐利，明确分工。此外，从盲目的自由使Rotex用户选择的需要，以达到预期的分离确切开口，在上最高规格的产品产量造成的屏幕。

          ROTEX ®旋回往复安检最大化损失最小的好产品的输出，有助于降低处理成本。在饲料月底圆周运动立即在屏幕上传播的物质，造成的罚款，对筛选下来的画面，把好产品消除尾以上。同时，超大颗粒轻轻转达了屏幕，最大限度地减少产品质量交叉到拒绝。这种分离精度，无需抛弃，重新处理，或找到替代产品使用的损失。此外，独特的Rotex能力，提前或推迟材料在放电结束通路使得进一步的微调，以实现应用程序的最有效和最准确的议案。

          安检的范围可以从1至5层筛网表面，对于开口1 / 2“，和325目。可选择地板安装，电缆悬挂，并在钢框架结构安装。

以上信息由中国振动机械网编辑翻译ROTEX原文，供行业交流学习使用，因水平有限、如有错误，敬请详解！

           以下为ROTEX原文：

July 27, 2010 — CINCINNATI, OH (July 27, 2010)—ROTEX Global, LLC, a global leader in screening technologies, offers a full line of Gyratory Reciprocating Screeners™ designed to accurately separate dry materials at high-production rates. ROTEX® Gyratory Reciprocating Screeners incorporate numerous innovative design features that provide unparalleled performance, ease of operation, and durability. These self-contained production screening machines utilize a unique gyratory-reciprocating motion and a positive screen mesh cleaning system that provide highly accurate separations and greater product yields at higher production rates. Gyratory Reciprocating Screeners are installed in thousands of locations worldwide, operating in a wide range of industries.

Unlike many competing screening machines, ROTEX® Gyratory Reciprocating Screeners impart two separate, distinct screening actions to maximize screening efficiency. The gyratory-reciprocating motion of the near-horizontal screen surface gives undersize material the maximum opportunity to pass through the mesh openings without the loss of near-size material. The motion also produces a continuous mesh cleaning action that prevents the material from lodging in the mesh openings, maximizing screening uptime.

ROTEX® Gyratory Reciprocating Screeners deliver higher yields than traditional screening machines. There is no vertical component to the motion, thus keeping the material in constant contact with the screen. The gyratory motion at the feed end rapidly stratifies the material over the full screening surface, maximizing screen utilization. Aggressive mesh cleaning balls continuously tap the screen surface, preventing screen blinding and further aiding stratification. Thus, a greater amount of undersize particles can quickly pass through the screen. The nearly linear reciprocating motion at the discharge end removes those particles closest in size to the mesh openings while gently conveying the quality material off the screen, ensuring a higher amount of good product is accurately separated into functional product.

Many competing screeners use one screening action to perform blinding and particle separation functions, which can sacrifice the effectiveness of one or both functions. The highly efficient combination of actions utilized by ROTEX® Gyratory Reciprocating Screeners provide extreme sharpness of separation, producing consistent on-spec product without sacrificing yield. The material is exposed to full mesh openings due to a slight incline of the screen deck, ensuring consistently sharp, well-defined separations. Additionally, freedom from blinding enables the Rotex user to choose screens with the exact openings required to achieve the desired separation, resulting in maximum yield of on-spec product.

ROTEX® Gyratory Reciprocating Screeners maximize output with minimal loss of good product, helping to reduce process costs. The circular motion at the feed end immediately spreads material across the screen, causing the fines to sift down against the screen, eliminating tail-over into good product. At the same time, oversize particles are gently conveyed off the screen, minimizing cross-over of quality product into the rejects. This accuracy of separation eliminates the need to discard, reprocess, or find substitute uses for lost product. In addition, the unique Rotex ability to advance or delay material flow at the discharge end allows further fine-tuning to achieve the most efficient and accurate motion for the application.

Screeners can range from one to five screen surfaces, for separations with openings 1/2" to 325 mesh. Optional floor mounting, cable suspension, and mounting on a structural steel framework are available.

For more information on ROTEX® Gyratory Reciprocating Screeners, or to obtain information on how ROTEX Screeners can resolve your screening challenges, contact ROTEX Global, LLC, 1230 Knowlton St., Cincinnati, OH 45223, www.rotex.com, 1-800-453-2321, Fax 513-541-4888, or email info@rotex.com.
About ROTEX GLOBAL, LLC
About ROTEX Global, LLC
ROTEX Global, LLC, is a pioneer and global leader in the development of screening equipment and technology for the process industries. Rotex offers an innovative line of separation equipment that includes: Gyratory and Vibratory Screeners and Sifters for Dry Applications, Liquid-Solid Separators for Wet Applications, Automated Particle Size Analyzers, and Vibratory Feeders and Conveyors. ROTEX® Parts & Service offers a full range of genuine parts and rebuild services.

Press Contact:
Steve Kirschner
Managing Director
Stimulus Worldwide
(513) 421-1169
skirschner@stimulusworldwide.com